Plasmonic nanolasers represent a promising class of coherent light sources, capable of confining and amplifying electromagnetic fields at the nanoscale. By leveraging the interaction between gain media and nanostructures, these devices enable ultrafast emission and exceptional spatial confinement, key requirements for the next generation of integrated photonics and biochemical sensing. This work focuses on engineering the lasing properties of periodic plasmonic lattices, utilizing the nanoparticle array as a feedback cavity to support hybrid photonic-plasmonic modes, known as Surface Lattice Resonances (SLRs). The experimental platform consists of aluminum (Al) truncated-cone nanoparticle arrays, fabricated via electron-beam lithography (EBL) on a SiO2 substrate, coupled with an organic gain medium composed by a dye (Lumogen F Red 305) embedded in a polymer (PMMA) matrix. First, a systematic procedure is established to map the dye concentration from the initial liquid phase (toluene-based solution) to the spin-coated thin film, providing precise control over the gain system. Then, the lasing emission is characterized in hexagonal nanoarrays with a lattice parameter of 475 nm and a particle radius of approximately 60 nm. For comparison, the extinction spectra of additional arrays with different particle radii are analyzed. Building upon previously identified parameters, specifically a 350 nm doped film thickness with a 5% (w/w) dye concentration, this research provides a comprehensive optimization of the lasing performance. The effect of the cell symmetry (Γ-K vs Γ-M modes), as well as the dependency on the polarization of the excitation pump (TE vs TM), are investigated. Finally, upon identification of the most promising configurations regarding symmetry and optical modes, the potential for further performance enhancement is explored through the adjustment of dye concentration at higher regimes.
Plasmonic nanolasers represent a promising class of coherent light sources, capable of confining and amplifying electromagnetic fields at the nanoscale. By leveraging the interaction between gain media and nanostructures, these devices enable ultrafast emission and exceptional spatial confinement, key requirements for the next generation of integrated photonics and biochemical sensing. This work focuses on engineering the lasing properties of periodic plasmonic lattices, utilizing the nanoparticle array as a feedback cavity to support hybrid photonic-plasmonic modes, known as Surface Lattice Resonances (SLRs). The experimental platform consists of aluminum (Al) truncated-cone nanoparticle arrays, fabricated via electron-beam lithography (EBL) on a SiO2 substrate, coupled with an organic gain medium composed by a dye (Lumogen F Red 305) embedded in a polymer (PMMA) matrix. First, a systematic procedure is established to map the dye concentration from the initial liquid phase (toluene-based solution) to the spin-coated thin film, providing precise control over the gain system. Then, the lasing emission is characterized in hexagonal nanoarrays with a lattice parameter of 475 nm and a particle radius of approximately 60 nm. For comparison, the extinction spectra of additional arrays with different particle radii are analyzed. Building upon previously identified parameters, specifically a 350 nm doped film thickness with a 5% (w/w) dye concentration, this research provides a comprehensive optimization of the lasing performance. The effect of the cell symmetry (Γ-K vs Γ-M modes), as well as the dependency on the polarization of the excitation pump (TE vs TM), are investigated. Finally, upon identification of the most promising configurations regarding symmetry and optical modes, the potential for further performance enhancement is explored through the adjustment of dye concentration at higher regimes.
Engineering Lasing Properties through Mode Coupling in Plasmonic Lattice Nanolasers
MARCHETTO, CARLO
2025/2026
Abstract
Plasmonic nanolasers represent a promising class of coherent light sources, capable of confining and amplifying electromagnetic fields at the nanoscale. By leveraging the interaction between gain media and nanostructures, these devices enable ultrafast emission and exceptional spatial confinement, key requirements for the next generation of integrated photonics and biochemical sensing. This work focuses on engineering the lasing properties of periodic plasmonic lattices, utilizing the nanoparticle array as a feedback cavity to support hybrid photonic-plasmonic modes, known as Surface Lattice Resonances (SLRs). The experimental platform consists of aluminum (Al) truncated-cone nanoparticle arrays, fabricated via electron-beam lithography (EBL) on a SiO2 substrate, coupled with an organic gain medium composed by a dye (Lumogen F Red 305) embedded in a polymer (PMMA) matrix. First, a systematic procedure is established to map the dye concentration from the initial liquid phase (toluene-based solution) to the spin-coated thin film, providing precise control over the gain system. Then, the lasing emission is characterized in hexagonal nanoarrays with a lattice parameter of 475 nm and a particle radius of approximately 60 nm. For comparison, the extinction spectra of additional arrays with different particle radii are analyzed. Building upon previously identified parameters, specifically a 350 nm doped film thickness with a 5% (w/w) dye concentration, this research provides a comprehensive optimization of the lasing performance. The effect of the cell symmetry (Γ-K vs Γ-M modes), as well as the dependency on the polarization of the excitation pump (TE vs TM), are investigated. Finally, upon identification of the most promising configurations regarding symmetry and optical modes, the potential for further performance enhancement is explored through the adjustment of dye concentration at higher regimes.| File | Dimensione | Formato | |
|---|---|---|---|
|
Marchetto_Carlo.pdf
Accesso riservato
Dimensione
9.88 MB
Formato
Adobe PDF
|
9.88 MB | Adobe PDF |
The text of this website © Università degli studi di Padova. Full Text are published under a non-exclusive license. Metadata are under a CC0 License
https://hdl.handle.net/20.500.12608/114139