The research focused on the synthesis and characterization of Fe-substituted perovskite electrodes for symmetrical solid oxide fuel cells (SOFCs). A series of compositions with the general formula Sr₁.₈FeₓTi₀.₂W₀.₂(M)₁.₆₋ₓO₆–δ (M = Ni, Co, Cu, Pd; x = 0.9–1.6) were synthesized using the sol–gel method under oxidizing and reducing atmospheres. Structural, microstructural, thermal, and electrochemical properties were investigated using XRD, SEM, TG, dilatometry, and electrochemical impedance spectroscopy (EIS). Among the studied compositions, Fe1.4 exhibited the most promising structural stability and electrochemical performance. High-temperature XRD confirmed good thermal stability over the temperature range of 25–1000 °C. Electrochemical measurements demonstrated a significant decrease in polarization resistance with increasing temperature, reaching values below 0.2 Ω·cm² at 800 °C. Post-mortem SEM/EDS analysis revealed no significant degradation, cracks, or delamination after testing. The obtained results indicate that Fe-substituted perovskite materials are promising candidates for intermediate-temperature SOFC electrode applications.

The research focused on the synthesis and characterization of Fe-substituted perovskite electrodes for symmetrical solid oxide fuel cells (SOFCs). A series of compositions with the general formula Sr₁.₈FeₓTi₀.₂W₀.₂(M)₁.₆₋ₓO₆–δ (M = Ni, Co, Cu, Pd; x = 0.9–1.6) were synthesized using the sol–gel method under oxidizing and reducing atmospheres. Structural, microstructural, thermal, and electrochemical properties were investigated using XRD, SEM, TG, dilatometry, and electrochemical impedance spectroscopy (EIS). Among the studied compositions, Fe1.4 exhibited the most promising structural stability and electrochemical performance. High-temperature XRD confirmed good thermal stability over the temperature range of 25–1000 °C. Electrochemical measurements demonstrated a significant decrease in polarization resistance with increasing temperature, reaching values below 0.2 Ω·cm² at 800 °C. Post-mortem SEM/EDS analysis revealed no significant degradation, cracks, or delamination after testing. The obtained results indicate that Fe-substituted perovskite materials are promising candidates for intermediate-temperature SOFC electrode applications.

Tuning new electrode materials with in situ exsolved nanoparticles for symmetrical solid oxide fuel cells

AHMADI, RAZIEH
2025/2026

Abstract

The research focused on the synthesis and characterization of Fe-substituted perovskite electrodes for symmetrical solid oxide fuel cells (SOFCs). A series of compositions with the general formula Sr₁.₈FeₓTi₀.₂W₀.₂(M)₁.₆₋ₓO₆–δ (M = Ni, Co, Cu, Pd; x = 0.9–1.6) were synthesized using the sol–gel method under oxidizing and reducing atmospheres. Structural, microstructural, thermal, and electrochemical properties were investigated using XRD, SEM, TG, dilatometry, and electrochemical impedance spectroscopy (EIS). Among the studied compositions, Fe1.4 exhibited the most promising structural stability and electrochemical performance. High-temperature XRD confirmed good thermal stability over the temperature range of 25–1000 °C. Electrochemical measurements demonstrated a significant decrease in polarization resistance with increasing temperature, reaching values below 0.2 Ω·cm² at 800 °C. Post-mortem SEM/EDS analysis revealed no significant degradation, cracks, or delamination after testing. The obtained results indicate that Fe-substituted perovskite materials are promising candidates for intermediate-temperature SOFC electrode applications.
2025
Tuning new electrode materials with in situ exsolved nanoparticles for symmetrical solid oxide fuel cells
The research focused on the synthesis and characterization of Fe-substituted perovskite electrodes for symmetrical solid oxide fuel cells (SOFCs). A series of compositions with the general formula Sr₁.₈FeₓTi₀.₂W₀.₂(M)₁.₆₋ₓO₆–δ (M = Ni, Co, Cu, Pd; x = 0.9–1.6) were synthesized using the sol–gel method under oxidizing and reducing atmospheres. Structural, microstructural, thermal, and electrochemical properties were investigated using XRD, SEM, TG, dilatometry, and electrochemical impedance spectroscopy (EIS). Among the studied compositions, Fe1.4 exhibited the most promising structural stability and electrochemical performance. High-temperature XRD confirmed good thermal stability over the temperature range of 25–1000 °C. Electrochemical measurements demonstrated a significant decrease in polarization resistance with increasing temperature, reaching values below 0.2 Ω·cm² at 800 °C. Post-mortem SEM/EDS analysis revealed no significant degradation, cracks, or delamination after testing. The obtained results indicate that Fe-substituted perovskite materials are promising candidates for intermediate-temperature SOFC electrode applications.
Symmetrical Cell
In situ exsolution
Nanoparticles
Electrode materials
Perovskite oxides
File in questo prodotto:
File Dimensione Formato  
Ahmadi_Razieh.pdf

embargo fino al 09/10/2027

Dimensione 2.35 MB
Formato Adobe PDF
2.35 MB Adobe PDF

The text of this website © Università degli studi di Padova. Full Text are published under a non-exclusive license. Metadata are under a CC0 License

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/20.500.12608/116663