Polarization drift in optical fibers represents a major challenge for polarization-encoded Quantum Key Distribution systems, since the fiber continuously modifies the polarization state carrying the quantum information. This work presents the design and experimental validation of a polarization tracking and correction protocol based on Wavelength Division Multiplexing reference signals and a QBER driven feedback loop. The protocol employs two reference channels symmetrically detuned around the quantum channel in order to reduce the residual error introduced by Polarization Mode Dispersion. The wavelength dependent transformation was experimentally characterized over fiber lengths from 10 to 150 km, showing an approximately quadratic QBER dependence for a single reference channel and a fourth order dependence for the normalized bisector of two symmetric reference signals. The tracking strategy was then validated through software based and closed loop hardware implementations. Finally, the temporal response of the correction was tested by reproducing in the laboratory a polarization trajectory measured over a deployed link of more than 100 km of aerial fiber. With a correction loop operating at approximately 14 Hz, the system achieved a mean QBER of 4.07% over a 12 hour acquisition, remaining below 11% for 93.6% of the time. The results validate the main elements of the proposed protocol and characterize both its residual tracking error and its temporal correction capability under realistic polarization dynamics.
Polarization drift in optical fibers represents a major challenge for polarization-encoded Quantum Key Distribution systems, since the fiber continuously modifies the polarization state carrying the quantum information. This work presents the design and experimental validation of a polarization tracking and correction protocol based on Wavelength Division Multiplexing reference signals and a QBER driven feedback loop. The protocol employs two reference channels symmetrically detuned around the quantum channel in order to reduce the residual error introduced by Polarization Mode Dispersion. The wavelength dependent transformation was experimentally characterized over fiber lengths from 10 to 150 km, showing an approximately quadratic QBER dependence for a single reference channel and a fourth order dependence for the normalized bisector of two symmetric reference signals. The tracking strategy was then validated through software based and closed loop hardware implementations. Finally, the temporal response of the correction was tested by reproducing in the laboratory a polarization trajectory measured over a deployed link of more than 100 km of aerial fiber. With a correction loop operating at approximately 14 Hz, the system achieved a mean QBER of 4.07% over a 12 hour acquisition, remaining below 11% for 93.6% of the time. The results validate the main elements of the proposed protocol and characterize both its residual tracking error and its temporal correction capability under realistic polarization dynamics.
Polarization Tracking and Correction Protocol for QKD Systems
LONGARONI, GIACOMO
2025/2026
Abstract
Polarization drift in optical fibers represents a major challenge for polarization-encoded Quantum Key Distribution systems, since the fiber continuously modifies the polarization state carrying the quantum information. This work presents the design and experimental validation of a polarization tracking and correction protocol based on Wavelength Division Multiplexing reference signals and a QBER driven feedback loop. The protocol employs two reference channels symmetrically detuned around the quantum channel in order to reduce the residual error introduced by Polarization Mode Dispersion. The wavelength dependent transformation was experimentally characterized over fiber lengths from 10 to 150 km, showing an approximately quadratic QBER dependence for a single reference channel and a fourth order dependence for the normalized bisector of two symmetric reference signals. The tracking strategy was then validated through software based and closed loop hardware implementations. Finally, the temporal response of the correction was tested by reproducing in the laboratory a polarization trajectory measured over a deployed link of more than 100 km of aerial fiber. With a correction loop operating at approximately 14 Hz, the system achieved a mean QBER of 4.07% over a 12 hour acquisition, remaining below 11% for 93.6% of the time. The results validate the main elements of the proposed protocol and characterize both its residual tracking error and its temporal correction capability under realistic polarization dynamics.| File | Dimensione | Formato | |
|---|---|---|---|
|
Longaroni_Giacomo.pdf
Accesso riservato
Dimensione
5.85 MB
Formato
Adobe PDF
|
5.85 MB | Adobe PDF |
The text of this website © Università degli studi di Padova. Full Text are published under a non-exclusive license. Metadata are under a CC0 License
https://hdl.handle.net/20.500.12608/116675