This thesis focuses on the development of a custom, modular, multi-physically coupled solver, operating in the time domain, for the simulation of a cantilevered piezoelectric energy harvester devoted to the generation of electrical power from flow-induced vibrations (FIV). The constituent modules have been developed and validated independently and later assembled for the construction of the final architecture. The structural module implements a linear Finite-Element Method (FEM) with two mixed-interpolation-of-tensorial-component shell element formulations: a conventional inert structural element, and a laminated composite element where one or more plies are piezoelectric, both of which are capable of robustly simulating in-plane and out-of-plane deformations. This latter element enables the simulation to account for the monolithic electromechanical coupling typical of piezoelectricity, capturing the mutual interaction between structure and circuitry. The structural dynamics is subsequently evolved by means of an implicit, unconditionally stable Newmark-beta method. The aerodynamic module, instead, implements the Unsteady Vortex-Lattice Method (UVLM), a potential lifting-surface panel method for the simulation of finite three-dimensional wings, allowing for an accurate portrayal of the unsteady wake-related effects. The two modules have been interfaced by means of an Infinite Plate Spline technique, which allows for the conservative and bi-directional transfer of loads, displacements, and deformation-induced velocities between the two non-matching structural and aerodynamic grids. The fluid-structure interaction (FSI) scheme is strongly coupled, including sub-iterations within each time step to eradicate all issues of artificial added-mass instability, finally allowing for the correct representation of the three main aeroelastic behaviours, namely: aerodynamically damped vibrations, flutter, and static divergence. The core architecture is implemented within the MATLAB environment, while, to speed up the execution of the aerodynamic module, computationally intensive low-level subroutines are written in FORTRAN and integrated via MEX functions.

Development of a 3D coupled finite-elements-vortex-lattice multifidelity solver for the simulation of a piezoelectric aeroelastic energy harvester

LUZZETTI, CRISTIANO
2025/2026

Abstract

This thesis focuses on the development of a custom, modular, multi-physically coupled solver, operating in the time domain, for the simulation of a cantilevered piezoelectric energy harvester devoted to the generation of electrical power from flow-induced vibrations (FIV). The constituent modules have been developed and validated independently and later assembled for the construction of the final architecture. The structural module implements a linear Finite-Element Method (FEM) with two mixed-interpolation-of-tensorial-component shell element formulations: a conventional inert structural element, and a laminated composite element where one or more plies are piezoelectric, both of which are capable of robustly simulating in-plane and out-of-plane deformations. This latter element enables the simulation to account for the monolithic electromechanical coupling typical of piezoelectricity, capturing the mutual interaction between structure and circuitry. The structural dynamics is subsequently evolved by means of an implicit, unconditionally stable Newmark-beta method. The aerodynamic module, instead, implements the Unsteady Vortex-Lattice Method (UVLM), a potential lifting-surface panel method for the simulation of finite three-dimensional wings, allowing for an accurate portrayal of the unsteady wake-related effects. The two modules have been interfaced by means of an Infinite Plate Spline technique, which allows for the conservative and bi-directional transfer of loads, displacements, and deformation-induced velocities between the two non-matching structural and aerodynamic grids. The fluid-structure interaction (FSI) scheme is strongly coupled, including sub-iterations within each time step to eradicate all issues of artificial added-mass instability, finally allowing for the correct representation of the three main aeroelastic behaviours, namely: aerodynamically damped vibrations, flutter, and static divergence. The core architecture is implemented within the MATLAB environment, while, to speed up the execution of the aerodynamic module, computationally intensive low-level subroutines are written in FORTRAN and integrated via MEX functions.
2025
Development of a 3D coupled finite-elements-vortex-lattice multifidelity solver for the simulation of a piezoelectric aeroelastic energy harvester
Piezoelectricity
FEM
Vortex-Lattice
FSI
FIV
File in questo prodotto:
File Dimensione Formato  
Luzzetti_Cristiano.pdf

accesso aperto

Dimensione 31.83 MB
Formato Adobe PDF
31.83 MB Adobe PDF Visualizza/Apri

The text of this website © Università degli studi di Padova. Full Text are published under a non-exclusive license. Metadata are under a CC0 License

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/20.500.12608/117271