Human neural tube morphogenesis is driven by a complex interplay between biochemical signals, extracellular matrix interactions, and spatial organization constraints. However, the anatomical inaccessibility of postimplantation embryonic development, together with ethical and technical limitations, hinders the direct in vivo investigation of these processes. Although three-dimensional models derived from human pluripotent stem cells (hPSCs) provide a valuable alternative, their predominantly self-organizing nature results in substantial morphological heterogeneity and limited control over microenvironmental geometry. This thesis proposes the development of engineered micropatterning platforms to introduce defined geometrical constraints and investigate the combined effects of matrix composition, spatial confinement, and biochemical stimulation on neuroepithelial cyst formation. Initially, a microcontact printing (μCP) strategy, a conventional approach for generating geometrical patterns of extracellular matrix proteins, is developed and optimized to guide hPSC adhesion onto defined protein domains. This approach requires elastomeric stamps produced by soft lithography from a microfabricated master generated through photolithography. The analysis of different ECM conditions, Matrigel and vitronectin, highlights the role of the matrix in promoting the transition from two-dimensional colonies to lumenized 3D cysts and in regulating their internal architecture. However, during three-dimensional growth, a progressive loss of the spatial confinement imposed by μCP is observed. Moreover, modifying pattern geometry requires the fabrication of a new master and corresponding elastomeric stamps, making system reconfiguration a multistep process dependent on dedicated microfabrication infrastructure. To overcome these biological and fabrication-related limitations, a photopatterning platform based on a photosensitive PEG polymer functionalized with coumarin groups (PEG–coumarin) is implemented. UVinduced photodimerization of the coumarin groups enables selective polymer crosslinking through a photomask, allowing the definition of cell-adhesive regions bounded by a PEG hydrogel. This stamp-free approach eliminates master fabrication and stamp replication steps: different pattern geometries can be obtained by simply designing and producing a new photomask, simplifying the workflow and enabling faster and more versatile geometrical reconfiguration. This configuration is compared with unconstrained cultures grown on a continuous Matrigel bed and therefore lacking defined spatial boundaries. The results obtained show that geometrical confinement achieved through photosensitive PEG photopatterning is associated with reduced dimensional and morphological variability of the cysts. Lumenogenesis analysis further reveals biochemical stimulation-dependent phenotypes: combined SAG+RA treatment is associated with larger and more elongated lumens, SAG alone produces an intermediate phenotype, whereas control conditions display smaller and predominantly circular lumens. Finally, analysis of the neuroepithelial markers FOXA2 and PAX6 shows that the cellular identities associated with the different treatments are maintained in 4 both confined and unconstrained cultures, while geometrical confinement is associated with a more regular spatial organization of the cell populations. In conclusion, the developed micro-engineered system provides a stamp-free and reconfigurable experimental platform to investigate how physical and biochemical signals contribute to early human neural tube morphogenesis, with reduced morphological variability compared with unconstrained culture conditions.
Human neural tube morphogenesis is driven by a complex interplay between biochemical signals, extracellular matrix interactions, and spatial organization constraints. However, the anatomical inaccessibility of postimplantation embryonic development, together with ethical and technical limitations, hinders the direct in vivo investigation of these processes. Although three-dimensional models derived from human pluripotent stem cells (hPSCs) provide a valuable alternative, their predominantly self-organizing nature results in substantial morphological heterogeneity and limited control over microenvironmental geometry. This thesis proposes the development of engineered micropatterning platforms to introduce defined geometrical constraints and investigate the combined effects of matrix composition, spatial confinement, and biochemical stimulation on neuroepithelial cyst formation. Initially, a microcontact printing (μCP) strategy, a conventional approach for generating geometrical patterns of extracellular matrix proteins, is developed and optimized to guide hPSC adhesion onto defined protein domains. This approach requires elastomeric stamps produced by soft lithography from a microfabricated master generated through photolithography. The analysis of different ECM conditions, Matrigel and vitronectin, highlights the role of the matrix in promoting the transition from two-dimensional colonies to lumenized 3D cysts and in regulating their internal architecture. However, during three-dimensional growth, a progressive loss of the spatial confinement imposed by μCP is observed. Moreover, modifying pattern geometry requires the fabrication of a new master and corresponding elastomeric stamps, making system reconfiguration a multistep process dependent on dedicated microfabrication infrastructure. To overcome these biological and fabrication-related limitations, a photopatterning platform based on a photosensitive PEG polymer functionalized with coumarin groups (PEG–coumarin) is implemented. UVinduced photodimerization of the coumarin groups enables selective polymer crosslinking through a photomask, allowing the definition of cell-adhesive regions bounded by a PEG hydrogel. This stamp-free approach eliminates master fabrication and stamp replication steps: different pattern geometries can be obtained by simply designing and producing a new photomask, simplifying the workflow and enabling faster and more versatile geometrical reconfiguration. This configuration is compared with unconstrained cultures grown on a continuous Matrigel bed and therefore lacking defined spatial boundaries. The results obtained show that geometrical confinement achieved through photosensitive PEG photopatterning is associated with reduced dimensional and morphological variability of the cysts. Lumenogenesis analysis further reveals biochemical stimulation-dependent phenotypes: combined SAG+RA treatment is associated with larger and more elongated lumens, SAG alone produces an intermediate phenotype, whereas control conditions display smaller and predominantly circular lumens. Finally, analysis of the neuroepithelial markers FOXA2 and PAX6 shows that the cellular identities associated with the different treatments are maintained in 4 both confined and unconstrained cultures, while geometrical confinement is associated with a more regular spatial organization of the cell populations. In conclusion, the developed micro-engineered system provides a stamp-free and reconfigurable experimental platform to investigate how physical and biochemical signals contribute to early human neural tube morphogenesis, with reduced morphological variability compared with unconstrained culture conditions.
Sviluppo di una piattaforma di micropatterning per investigare gli effetti delle proprietà della matrice extracellulare e del confinamento spaziale sullo sviluppo del tubo neurale
SIERRA DE LA ROSA, BEATRICE
2025/2026
Abstract
Human neural tube morphogenesis is driven by a complex interplay between biochemical signals, extracellular matrix interactions, and spatial organization constraints. However, the anatomical inaccessibility of postimplantation embryonic development, together with ethical and technical limitations, hinders the direct in vivo investigation of these processes. Although three-dimensional models derived from human pluripotent stem cells (hPSCs) provide a valuable alternative, their predominantly self-organizing nature results in substantial morphological heterogeneity and limited control over microenvironmental geometry. This thesis proposes the development of engineered micropatterning platforms to introduce defined geometrical constraints and investigate the combined effects of matrix composition, spatial confinement, and biochemical stimulation on neuroepithelial cyst formation. Initially, a microcontact printing (μCP) strategy, a conventional approach for generating geometrical patterns of extracellular matrix proteins, is developed and optimized to guide hPSC adhesion onto defined protein domains. This approach requires elastomeric stamps produced by soft lithography from a microfabricated master generated through photolithography. The analysis of different ECM conditions, Matrigel and vitronectin, highlights the role of the matrix in promoting the transition from two-dimensional colonies to lumenized 3D cysts and in regulating their internal architecture. However, during three-dimensional growth, a progressive loss of the spatial confinement imposed by μCP is observed. Moreover, modifying pattern geometry requires the fabrication of a new master and corresponding elastomeric stamps, making system reconfiguration a multistep process dependent on dedicated microfabrication infrastructure. To overcome these biological and fabrication-related limitations, a photopatterning platform based on a photosensitive PEG polymer functionalized with coumarin groups (PEG–coumarin) is implemented. UVinduced photodimerization of the coumarin groups enables selective polymer crosslinking through a photomask, allowing the definition of cell-adhesive regions bounded by a PEG hydrogel. This stamp-free approach eliminates master fabrication and stamp replication steps: different pattern geometries can be obtained by simply designing and producing a new photomask, simplifying the workflow and enabling faster and more versatile geometrical reconfiguration. This configuration is compared with unconstrained cultures grown on a continuous Matrigel bed and therefore lacking defined spatial boundaries. The results obtained show that geometrical confinement achieved through photosensitive PEG photopatterning is associated with reduced dimensional and morphological variability of the cysts. Lumenogenesis analysis further reveals biochemical stimulation-dependent phenotypes: combined SAG+RA treatment is associated with larger and more elongated lumens, SAG alone produces an intermediate phenotype, whereas control conditions display smaller and predominantly circular lumens. Finally, analysis of the neuroepithelial markers FOXA2 and PAX6 shows that the cellular identities associated with the different treatments are maintained in 4 both confined and unconstrained cultures, while geometrical confinement is associated with a more regular spatial organization of the cell populations. In conclusion, the developed micro-engineered system provides a stamp-free and reconfigurable experimental platform to investigate how physical and biochemical signals contribute to early human neural tube morphogenesis, with reduced morphological variability compared with unconstrained culture conditions.| File | Dimensione | Formato | |
|---|---|---|---|
|
SierraDeLaRosa_Beatrice.pdf
accesso aperto
Dimensione
5.1 MB
Formato
Adobe PDF
|
5.1 MB | Adobe PDF | Visualizza/Apri |
The text of this website © Università degli studi di Padova. Full Text are published under a non-exclusive license. Metadata are under a CC0 License
https://hdl.handle.net/20.500.12608/118555