Urban pluvial flooding represents a critical and growing challenge for modern city management and infrastructure safety. Intense rainfall can rapidly overload urban drainage systems, making it essential for flood prevention to identify critical areas of the network in advance. Traditionally, runoff and drainage phenomena are simulated using coupled 1D/2D models, which combine a one-dimensional solver for sewer networks with a two-dimensional solver for surface runoff. While accurate, these dual-drainage models face three major practical limitations: prohibitive set-up efforts, high computational costs, and a massive demand for geometric data, which is often unavailable for secondary underground branches. To address the above limitations, an innovative subgrid modeling strategy is here explored. This approach, recently proposed in scientific literature, directly integrates the drainage capacity of the secondary sewer network into the cells of the 2D domain, eliminating the need to explicitly model minor 1D branches. Furthermore, it enables the effective application of the Rain-on-Grid method by preventing fictitious water accumulation in surface micro-depressions, thereby drastically reducing both the model setup effort and the required computational resources. This thesis aims to test this subgrid model on a complex case study in Morón de la Frontera (Seville, Spain), detailing the input setup step-by-step and analyzing the outputs. Concurrently, the standard Iber-SWMM dual drainage model, applied to the same area by researchers from the University of la Coruña, is used as benchmark to assess the effectiveness and efficiency of the simplified subgrid method for secondary stormwater network modeling.

Urban pluvial flooding represents a critical and growing challenge for modern city management and infrastructure safety. Intense rainfall can rapidly overload urban drainage systems, making it essential for flood prevention to identify critical areas of the network in advance. Traditionally, runoff and drainage phenomena are simulated using coupled 1D/2D models, which combine a one-dimensional solver for sewer networks with a two-dimensional solver for surface runoff. While accurate, these dual-drainage models face three major practical limitations: prohibitive set-up efforts, high computational costs, and a massive demand for geometric data, which is often unavailable for secondary underground branches. To address the above limitations, an innovative subgrid modeling strategy is here explored. This approach, recently proposed in scientific literature, directly integrates the drainage capacity of the secondary sewer network into the cells of the 2D domain, eliminating the need to explicitly model minor 1D branches. Furthermore, it enables the effective application of the Rain-on-Grid method by preventing fictitious water accumulation in surface micro-depressions, thereby drastically reducing both the model setup effort and the required computational resources. This thesis aims to test this subgrid model on a complex case study in Morón de la Frontera (Seville, Spain), detailing the input setup step-by-step and analyzing the outputs. Concurrently, the standard Iber-SWMM dual drainage model, applied to the same area by researchers from the University of la Coruña, is used as benchmark to assess the effectiveness and efficiency of the simplified subgrid method for secondary stormwater network modeling.

Pluvial flood modeling in complex urban areas: Testing an efficient subgrid scheme as an alternative to 1D–2D dual-drainage models

SCHIAVO, MARCO
2025/2026

Abstract

Urban pluvial flooding represents a critical and growing challenge for modern city management and infrastructure safety. Intense rainfall can rapidly overload urban drainage systems, making it essential for flood prevention to identify critical areas of the network in advance. Traditionally, runoff and drainage phenomena are simulated using coupled 1D/2D models, which combine a one-dimensional solver for sewer networks with a two-dimensional solver for surface runoff. While accurate, these dual-drainage models face three major practical limitations: prohibitive set-up efforts, high computational costs, and a massive demand for geometric data, which is often unavailable for secondary underground branches. To address the above limitations, an innovative subgrid modeling strategy is here explored. This approach, recently proposed in scientific literature, directly integrates the drainage capacity of the secondary sewer network into the cells of the 2D domain, eliminating the need to explicitly model minor 1D branches. Furthermore, it enables the effective application of the Rain-on-Grid method by preventing fictitious water accumulation in surface micro-depressions, thereby drastically reducing both the model setup effort and the required computational resources. This thesis aims to test this subgrid model on a complex case study in Morón de la Frontera (Seville, Spain), detailing the input setup step-by-step and analyzing the outputs. Concurrently, the standard Iber-SWMM dual drainage model, applied to the same area by researchers from the University of la Coruña, is used as benchmark to assess the effectiveness and efficiency of the simplified subgrid method for secondary stormwater network modeling.
2025
Pluvial flood modeling in complex urban areas: Testing an efficient subgrid scheme as an alternative to 1D–2D dual-drainage models
Urban pluvial flooding represents a critical and growing challenge for modern city management and infrastructure safety. Intense rainfall can rapidly overload urban drainage systems, making it essential for flood prevention to identify critical areas of the network in advance. Traditionally, runoff and drainage phenomena are simulated using coupled 1D/2D models, which combine a one-dimensional solver for sewer networks with a two-dimensional solver for surface runoff. While accurate, these dual-drainage models face three major practical limitations: prohibitive set-up efforts, high computational costs, and a massive demand for geometric data, which is often unavailable for secondary underground branches. To address the above limitations, an innovative subgrid modeling strategy is here explored. This approach, recently proposed in scientific literature, directly integrates the drainage capacity of the secondary sewer network into the cells of the 2D domain, eliminating the need to explicitly model minor 1D branches. Furthermore, it enables the effective application of the Rain-on-Grid method by preventing fictitious water accumulation in surface micro-depressions, thereby drastically reducing both the model setup effort and the required computational resources. This thesis aims to test this subgrid model on a complex case study in Morón de la Frontera (Seville, Spain), detailing the input setup step-by-step and analyzing the outputs. Concurrently, the standard Iber-SWMM dual drainage model, applied to the same area by researchers from the University of la Coruña, is used as benchmark to assess the effectiveness and efficiency of the simplified subgrid method for secondary stormwater network modeling.
Modeling
Floods
Subgrid
File in questo prodotto:
File Dimensione Formato  
Schiavo_Marco.pdf

accesso aperto

Dimensione 12.91 MB
Formato Adobe PDF
12.91 MB Adobe PDF Visualizza/Apri

The text of this website © Università degli studi di Padova. Full Text are published under a non-exclusive license. Metadata are under a CC0 License

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/20.500.12608/119069