In this thesis the effect of single pulses (λ = 248 nm; τpulse 22 ns) laser processing by was studied on thin films of amorphous germanium (a-Ge), deposited by magnetron sputtering on crystalline germanium (c-Ge) substrates. Two different film thicknesses were analyzed, equal to 8.5 nm and 31 nm, in order to understand the morphological and structural evolution of the material as a function of the laser energy density (ED) and the initial thickness of the film. Characterization by atomic force microscopy (AFM) and Raman spectroscopy allowed to identify different regime in which laser processing induce a phase transformation in the in the a-Ge film. For ED < 100 mJ/cm^2 the maintenance of the amorphous phase is still observed, accompanied by modifications of the surface morphology that depend on the thickness of the deposited film. As the ED increases in the range 100 to 175 mJ/cm^2 the crystallization of the a-Ge film is observed, highlighted by the disappearance of the Raman peak relative to the amorphous and by the simultaneous shift of the signal associated with the transverse optical (TO) mode of c-Ge towards lower Raman shift values. The comparison of the spectra with those predicted by a theoretical model allowed to attribute the shift of the Raman peak to the formation of Ge nanocrystals (NCs), whose size was estimated in the range between about 5 and 6 nm. For ED > 175 mJ/cm^2, the process evolves towards phenomena of localized ablation of the film, while for values higher than 260 mJ/cm^2 the complete melting of the a-Ge film and of the surface layer of the crystalline substrate occurs. In these conditions, the subsequent ultrafast epitaxial regrowth determines the formation of a crystalline structure that preserves the crystallographic orientation imposed by the substrate. Overall, the results highlight a progressive evolution of the system's response as the laser energy density increases, from the conservation of the amorphous phase to the formation of nanocrystals and, at higher energies, to the melting and subsequent epitaxial recrystallization of the material.

In questa tesi è stato studiato l’effetto del laser processing, mediante singoli impulsi laser (λ = 248 nm; τ = 22 ns), su film sottili di germanio amorfo (a-Ge), depositati mediante magnetron sputtering su substrati di germanio cristallino (c-Ge). Sono stati analizzati due diversi spessori dei film, pari a 8,5 nm e 31 nm, al fine di analizzare l’evoluzione morfologica e strutturale del materiale in funzione della densità di energia laser (ED) e dello spessore iniziale del film. La caratterizzazione mediante microscopia a forza atomica (AFM) e spettroscopia Raman ha permesso di individuare le diverse condizioni in cui il laser processing può indurre una trasformazione di fase nel film di a-Ge. Per ED < 100 mJ/cm^2 si osserva il mantenimento della fase amorfa, accompagnata da modificazioni della morfologia superficiale che dipendono dallo spessore del film depositato. Nell’intervallo 100-175 mJ/cm^2 si osserva la cristallizzazione del film di a-Ge, come evidenziato dalla scomparsa del picco Raman relativo alla fase amorfa e dal contemporaneo spostamento del segnale associato al modo ottico trasverso (TO) del c-Ge verso valori di Raman shift inferiori. Il confronto degli spettri con quelli previsti da un modello teorico ha permesso di attribuire lo spostamento del picco Raman alla formazione di nanocristalli (NCs) di Ge, la cui dimensione è stata stimata nell’intervallo compreso tra circa 5 e 6 nm. Per ED > 175 mJ/cm^2, il processo evolve verso fenomeni di ablazione localizzata del film, mentre per valori superiori a circa 260 mJ/cm^2 si verifica la completa fusione del film di a-Ge e dello strato superficiale del substrato cristallino. In queste condizioni, la successiva ricrescita epitassiale ultrarapida determina la formazione di una struttura cristallina che conserva l’orientazione cristallografica imposta dal substrato. Nel complesso, i risultati evidenziano una progressiva evoluzione della risposta del sistema all’aumentare della densità di energia laser, dalla conservazione della fase amorfa alla formazione di nanocristalli e, per energie più elevate, alla fusione e successiva ricristallizzazione epitassiale del materiale.

Cristallizzazione di film sottili di germanio amorfo depositato su substrati di germanio mediante laser UV a impulsi nanosecondi.

RIZZO, SEBASTIANO
2025/2026

Abstract

In this thesis the effect of single pulses (λ = 248 nm; τpulse 22 ns) laser processing by was studied on thin films of amorphous germanium (a-Ge), deposited by magnetron sputtering on crystalline germanium (c-Ge) substrates. Two different film thicknesses were analyzed, equal to 8.5 nm and 31 nm, in order to understand the morphological and structural evolution of the material as a function of the laser energy density (ED) and the initial thickness of the film. Characterization by atomic force microscopy (AFM) and Raman spectroscopy allowed to identify different regime in which laser processing induce a phase transformation in the in the a-Ge film. For ED < 100 mJ/cm^2 the maintenance of the amorphous phase is still observed, accompanied by modifications of the surface morphology that depend on the thickness of the deposited film. As the ED increases in the range 100 to 175 mJ/cm^2 the crystallization of the a-Ge film is observed, highlighted by the disappearance of the Raman peak relative to the amorphous and by the simultaneous shift of the signal associated with the transverse optical (TO) mode of c-Ge towards lower Raman shift values. The comparison of the spectra with those predicted by a theoretical model allowed to attribute the shift of the Raman peak to the formation of Ge nanocrystals (NCs), whose size was estimated in the range between about 5 and 6 nm. For ED > 175 mJ/cm^2, the process evolves towards phenomena of localized ablation of the film, while for values higher than 260 mJ/cm^2 the complete melting of the a-Ge film and of the surface layer of the crystalline substrate occurs. In these conditions, the subsequent ultrafast epitaxial regrowth determines the formation of a crystalline structure that preserves the crystallographic orientation imposed by the substrate. Overall, the results highlight a progressive evolution of the system's response as the laser energy density increases, from the conservation of the amorphous phase to the formation of nanocrystals and, at higher energies, to the melting and subsequent epitaxial recrystallization of the material.
2025
Crystallization of amorphous germanium thin films deposited on germanium substrates by nanosecond UV laser pulses.
In questa tesi è stato studiato l’effetto del laser processing, mediante singoli impulsi laser (λ = 248 nm; τ = 22 ns), su film sottili di germanio amorfo (a-Ge), depositati mediante magnetron sputtering su substrati di germanio cristallino (c-Ge). Sono stati analizzati due diversi spessori dei film, pari a 8,5 nm e 31 nm, al fine di analizzare l’evoluzione morfologica e strutturale del materiale in funzione della densità di energia laser (ED) e dello spessore iniziale del film. La caratterizzazione mediante microscopia a forza atomica (AFM) e spettroscopia Raman ha permesso di individuare le diverse condizioni in cui il laser processing può indurre una trasformazione di fase nel film di a-Ge. Per ED < 100 mJ/cm^2 si osserva il mantenimento della fase amorfa, accompagnata da modificazioni della morfologia superficiale che dipendono dallo spessore del film depositato. Nell’intervallo 100-175 mJ/cm^2 si osserva la cristallizzazione del film di a-Ge, come evidenziato dalla scomparsa del picco Raman relativo alla fase amorfa e dal contemporaneo spostamento del segnale associato al modo ottico trasverso (TO) del c-Ge verso valori di Raman shift inferiori. Il confronto degli spettri con quelli previsti da un modello teorico ha permesso di attribuire lo spostamento del picco Raman alla formazione di nanocristalli (NCs) di Ge, la cui dimensione è stata stimata nell’intervallo compreso tra circa 5 e 6 nm. Per ED > 175 mJ/cm^2, il processo evolve verso fenomeni di ablazione localizzata del film, mentre per valori superiori a circa 260 mJ/cm^2 si verifica la completa fusione del film di a-Ge e dello strato superficiale del substrato cristallino. In queste condizioni, la successiva ricrescita epitassiale ultrarapida determina la formazione di una struttura cristallina che conserva l’orientazione cristallografica imposta dal substrato. Nel complesso, i risultati evidenziano una progressiva evoluzione della risposta del sistema all’aumentare della densità di energia laser, dalla conservazione della fase amorfa alla formazione di nanocristalli e, per energie più elevate, alla fusione e successiva ricristallizzazione epitassiale del materiale.
laser melting
germanium
phase change
sputtering
crystallization
File in questo prodotto:
File Dimensione Formato  
Rizzo_Sebastiano.pdf

Accesso riservato

Dimensione 7.22 MB
Formato Adobe PDF
7.22 MB Adobe PDF

The text of this website © Università degli studi di Padova. Full Text are published under a non-exclusive license. Metadata are under a CC0 License

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/20.500.12608/115023