In competition vehicles, steering system geometry plays a decisive role in determining cornering performance. Karting represents a particularly significant engineering case study: the absence of suspension and a differential isolates the steering system as the dominant element of the vehicle's dynamic behavior, making every geometric parameter directly responsible for cornering response. This work addresses a systematic analysis of the steering kinematics of a KZ-category competition kart, the top-tier category in karting, characterized by a sequential gearbox and high engine performance. After describing the vehicle's main components (chassis, rear axle, engine, steering system) and the fundamental geometric parameters (caster, camber, toe, Ackermann), the thesis focuses on defining the steering trapezoid, calculating the steering ratio, and determining the Instantaneous Center of Rotation (ICR). Particular attention is given to comparing the actual steering geometry with the ideal Ackermann condition, through quantification of the Ackermann error and identification of the geometric parameters that most strongly influence the vehicle's dynamic behavior. To support the theoretical analysis, a CAD model of the steering system was developed in SolidWorks, used to verify the analytical results and simulate its kinematics. The results obtained provide a methodological basis useful for future design optimizations of steering geometry in karting applications.
Nei veicoli da competizione, la geometria del sistema di sterzo influisce in modo determinante sulle prestazioni in curva. Il karting rappresenta un caso di studio ingegneristico particolarmente significativo: l'assenza di sospensioni e differenziale isola il sistema di sterzo come elemento dominante del comportamento dinamico del veicolo, rendendo ogni parametro geometrico direttamente responsabile della risposta in curva. Il presente lavoro affronta l'analisi sistematica della cinematica dello sterzo di un kart da competizione di categoria KZ, la categoria di vertice del karting, caratterizzata da cambio sequenziale ed elevate prestazioni motoristiche. Dopo una descrizione dei componenti principali del veicolo (telaio, assale posteriore, motore, sistema di sterzo) e dei parametri geometrici fondamentali (caster, camber, toe, Ackermann), la tesi si concentra sulla definizione del trapezio di sterzo, sul calcolo del rapporto di sterzo e sull'individuazione del Centro Istantaneo di Rotazione (CIR). Particolare attenzione è dedicata al confronto tra la geometria di sterzo reale e la condizione ideale di Ackermann, attraverso la quantificazione dell'errore di Ackermann e l'identificazione dei parametri geometrici che maggiormente influenzano il comportamento dinamico del veicolo. A supporto dell'analisi teorica, è stato sviluppato un modello CAD del sistema di sterzo in ambiente SolidWorks, utilizzato per verificare i risultati analitici e simularne la cinematica. I risultati ottenuti forniscono una base metodologica utile per future ottimizzazioni progettuali della geometria di sterzo in ambito karting.
Analisi cinematica dello sterzo di un kart da competizione
BONDI', EDOARDO
2025/2026
Abstract
In competition vehicles, steering system geometry plays a decisive role in determining cornering performance. Karting represents a particularly significant engineering case study: the absence of suspension and a differential isolates the steering system as the dominant element of the vehicle's dynamic behavior, making every geometric parameter directly responsible for cornering response. This work addresses a systematic analysis of the steering kinematics of a KZ-category competition kart, the top-tier category in karting, characterized by a sequential gearbox and high engine performance. After describing the vehicle's main components (chassis, rear axle, engine, steering system) and the fundamental geometric parameters (caster, camber, toe, Ackermann), the thesis focuses on defining the steering trapezoid, calculating the steering ratio, and determining the Instantaneous Center of Rotation (ICR). Particular attention is given to comparing the actual steering geometry with the ideal Ackermann condition, through quantification of the Ackermann error and identification of the geometric parameters that most strongly influence the vehicle's dynamic behavior. To support the theoretical analysis, a CAD model of the steering system was developed in SolidWorks, used to verify the analytical results and simulate its kinematics. The results obtained provide a methodological basis useful for future design optimizations of steering geometry in karting applications.| File | Dimensione | Formato | |
|---|---|---|---|
|
Bondì_Edoardo.pdf
Accesso riservato
Dimensione
1.78 MB
Formato
Adobe PDF
|
1.78 MB | Adobe PDF |
The text of this website © Università degli studi di Padova. Full Text are published under a non-exclusive license. Metadata are under a CC0 License
https://hdl.handle.net/20.500.12608/115264