This thesis analyzes the space heating energy demand of a residential building through thermal load modeling and assessment of the thermal behavior of the building insulation. Based on the results, the proposed retrofit involves replacing the existing gas boiler with an air-source heat pump integrated with a photovoltaic system, while maintaining the existing renewable systems (biomass stove and solar thermal collector), with the goal of achieving a heating system fully powered by renewable energy. The study also considers the potential integration of electrical storage for the PV system and the replacement of gas cooking with an induction hob to make the home independent of the gas supply. A techno-economic analysis of the proposed solution is included, with particular focus on thermal comfort and environmental impact reduction.

L'elaborato analizza il fabbisogno energetico per il riscaldamento di un’abitazione residenziale tramite modellizzazione dei consumi termici e valutando il comportamento dell’involucro esterno dell'edificio. Sulla base dell’analisi, si propone la sostituzione della caldaia a gas con una pompa di calore integrata a un impianto fotovoltaico, mantenendo i sistemi rinnovabili esistenti (stufa a legna e solare termico), con l’obiettivo di realizzare un impianto di riscaldamento completamente alimentato da fonti rinnovabili. Vengono inoltre considerati un eventuale sistema di accumulo dell'impianto fotovoltaico e la sostituzione della cottura a gas con piano di cottura ad induzione per rendere l'abitazione indipendente dalla fornitura di gas. Il lavoro include una valutazione tecnico-economica della proposta, con attenzione al comfort termico e alla riduzione dei consumi.

Analisi per la riqualificazione energetica di un edificio residenziale

FRIGO, STEFANO
2024/2025

Abstract

This thesis analyzes the space heating energy demand of a residential building through thermal load modeling and assessment of the thermal behavior of the building insulation. Based on the results, the proposed retrofit involves replacing the existing gas boiler with an air-source heat pump integrated with a photovoltaic system, while maintaining the existing renewable systems (biomass stove and solar thermal collector), with the goal of achieving a heating system fully powered by renewable energy. The study also considers the potential integration of electrical storage for the PV system and the replacement of gas cooking with an induction hob to make the home independent of the gas supply. A techno-economic analysis of the proposed solution is included, with particular focus on thermal comfort and environmental impact reduction.
2024
Energy audit for a residential building
L'elaborato analizza il fabbisogno energetico per il riscaldamento di un’abitazione residenziale tramite modellizzazione dei consumi termici e valutando il comportamento dell’involucro esterno dell'edificio. Sulla base dell’analisi, si propone la sostituzione della caldaia a gas con una pompa di calore integrata a un impianto fotovoltaico, mantenendo i sistemi rinnovabili esistenti (stufa a legna e solare termico), con l’obiettivo di realizzare un impianto di riscaldamento completamente alimentato da fonti rinnovabili. Vengono inoltre considerati un eventuale sistema di accumulo dell'impianto fotovoltaico e la sostituzione della cottura a gas con piano di cottura ad induzione per rendere l'abitazione indipendente dalla fornitura di gas. Il lavoro include una valutazione tecnico-economica della proposta, con attenzione al comfort termico e alla riduzione dei consumi.
Analisi energetica
Riqualificazione
Fonti rinnovabili
File in questo prodotto:
File Dimensione Formato  
Frigo_Stefano.pdf

accesso aperto

Dimensione 2.83 MB
Formato Adobe PDF
2.83 MB Adobe PDF Visualizza/Apri

The text of this website © Università degli studi di Padova. Full Text are published under a non-exclusive license. Metadata are under a CC0 License

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/20.500.12608/92861